Table of contents Exit focus mode. This setting will refresh the specific recovery password that was used, and other unused passwords on the volume will remain unchanged. Hit Show Recovery Увидеть больше. BitLocker support for TPM 2. This protection shouldn’t be cumbersome to users. Windows 10 pro bitlocker intune free download policy setting перейти applied when you turn on BitLocker and controls whether fixed data drives utilize Used Space Only encryption or Full encryption. This node needs to be queried in synchronization with RotateRecoveryPasswordsStatus to ensure the status is correctly matched to the request ID.
 
 

 

Windows 10 pro bitlocker intune free download

 

Before we start, we need to have devices enrolled with Intune. Then click on Device configuration Profiles.

In the new window, provide a name for the policy. Also, provide a brief description in the Description box for easy management.

In the platform dropdown, select Windows 10 and later option. Then on the Profile type select Endpoint Protection. It will load up all the related policy settings.

From the list, click on Windows Encryption. In this demo, I am using the following,. This way users can retrieve keys using the Azure portal when required. Click OK at the end to return to the main profile settings. Then click on Create to set up the profile. Once the profile is setup, click on Assignments to define the target.

But if you have a specific target, you can use Select group to include option. Once the selection is done click on Save to apply the changes. Then log in to Windows 10 machine, and go to Access work or school under account settings. Click on the work account and then Info button. Then click on Sync option to sync settings with intune changes.

In a few seconds it will prompt the following message, click on it to proceed. It will open the following window. Select I don’t have any other disk encryption software installed, encrypt all my disks. Then click on Yes to proceed with encryption. It will open up the bit locker wizard, in there make sure to save recovery keys to the cloud domain account. Three settings determine whether an OS drive will be encrypted using used space only or full disk encryption:. Assuming that SystemDrivesEncryptionType has not been configured, the following is the expected behaviour.

When silent enablement is configured on a modern standby device, the OS drive will be encrypted using used space only encryption. When silent enablement is configured on a device which is not capable of modern standby, the OS drive will be encrypted using full disk encryption. The result is the same whether you are using an Endpoint Security disk encryption policy for BitLocker or a Device Configuration profile for endpoint protection for BitLocker.

If a different end state is required, the encryption type can be controlled by configuring the SystemDrivesEncryptionType using settings catalog as shown below. To verify whether the hardware is modern standby capable, run the following command from a command prompt:. If the device does not support modern standby, such as a virtual machine, it will show that Standby S0 Low Power Idle Network Connected is not supported. To verify the encryption type, run the following command from an elevated admin command prompt:.

To change the disk encryption type between full disk encryption and used space only encryption, leverage the’Enforce drive encryption type on operating system drives’ setting within settings catalog. When a TPM startup PIN or startup key is required on a device, BitLocker can’t silently enable on the device and instead requires interaction from the end user.

By default, these policies do not configure these settings. Endpoint security disk encryption policy – In the BitLocker profile you’ll find the following settings in the BitLocker – OS Drive Settings category when BitLocker system drive policy is set to Configure , and then Startup authentication required is set to Yes. Device configuration policy – In the endpoint protection template you’l find the following settings in the Windows Encryption category:.

These configurations might block silent enablement of BitLocker. If you deploy this baseline to devices on which you want to silently enable BitLocker, review your baseline configurations for possible conflicts. To remove conflicts, either reconfigure the settings in the baselines to remove the conflict, or remove applicable devices from receiving the baseline instances that configure TPM settings that block silent enablement of BitLocker.

Support to view recovery keys can also extend to your tenant-attached devices. Select a device from the list, and then under Monitor , select Recovery keys.

Hit Show Recovery Key. Selecting this will generate an audit log entry under ‘KeyManagement’ activity. If you reach this limit, silent encryption will fail due to the failing backup of recovery keys before starting encryption on the device. IT admins need to have a specific permission within Azure Active Directory to be able to see device BitLocker recovery keys: microsoft. All BitLocker recovery key accesses are audited. For more information on Audit Log entries, see Azure portal audit logs.

Removing the key protector leaves BitLocker in a suspended state on that volume. This is necessary because BitLocker recovery information for Azure AD joined devices is attached to the Azure AD computer object and deleting it may leave you unable to recover from a BitLocker recovery event.

To support the display of recovery keys for tenant attached devices, your Configuration Manager sites must run version or later. For more information, see Configure role-based administration for Configuration Manager. You can use an Intune device action to remotely rotate the BitLocker recovery key of a device that runs Windows 10 version or later, and Windows Azure AD-joined and Hybrid-joined devices must have support for key rotation enabled via BitLocker policy configuration:.

For information about BitLocker deployments and requirements, see the BitLocker deployment comparison chart. In the list of devices that you manage, select a device, select More , and then select the BitLocker key rotation device remote action. On the Overview page of the device, select the BitLocker key rotation.

 
 

Enforcing BitLocker policies by using Intune known issues – Windows security | Microsoft Docs

 
 

Device configuration policy – In the endpoint protection template you’l find the following settings in the Windows Encryption category:. These configurations might block silent enablement of BitLocker. If you deploy this baseline to devices on which you want to silently enable BitLocker, review your baseline configurations for possible conflicts. To remove conflicts, either reconfigure the settings in the baselines to remove the conflict, or remove applicable devices from receiving the baseline instances that configure TPM settings that block silent enablement of BitLocker.

Support to view recovery keys can also extend to your tenant-attached devices. Select a device from the list, and then under Monitor , select Recovery keys. Hit Show Recovery Key. Selecting this will generate an audit log entry under ‘KeyManagement’ activity. If you reach this limit, silent encryption will fail due to the failing backup of recovery keys before starting encryption on the device.

IT admins need to have a specific permission within Azure Active Directory to be able to see device BitLocker recovery keys: microsoft. All BitLocker recovery key accesses are audited. For more information on Audit Log entries, see Azure portal audit logs. Removing the key protector leaves BitLocker in a suspended state on that volume. This is necessary because BitLocker recovery information for Azure AD joined devices is attached to the Azure AD computer object and deleting it may leave you unable to recover from a BitLocker recovery event.

To support the display of recovery keys for tenant attached devices, your Configuration Manager sites must run version or later. For more information, see Configure role-based administration for Configuration Manager. You can use an Intune device action to remotely rotate the BitLocker recovery key of a device that runs Windows 10 version or later, and Windows Table of contents Exit focus mode. Table of contents. Applies to: Windows 10 Windows 11 Windows Server and above.

How BitLocker works with operating system drives BitLocker Can be used to mitigate unauthorized data access on lost or stolen computers by encrypting all user files and system files on the operating system drive, including the swap files and hibernation files, and checking the integrity of early boot components and boot configuration data.

How BitLocker works with fixed and removable data drives BitLocker can be used to encrypt the entire contents of a data drive. Note Dynamic disks aren’t supported by BitLocker. Note TPM 2. It has a secure update mechanism to help prevent a malicious BIOS or boot firmware from being installed on the computer. Submit and view feedback for This product This page.

Saving a recovery password with a Microsoft account online is only allowed when BitLocker is used on a PC that isn’t a member of a domain. Data recovery agents can use their credentials to unlock the drive. If the drive is an operating system drive, the drive must be mounted as a data drive on another computer for the data recovery agent to unlock it.

A domain administrator can obtain the recovery password from AD DS and use it to unlock the drive. Storing recovery passwords in AD DS is recommended to provide a way for IT professionals to be able to obtain recovery passwords for drives in an organization if needed.

For more information, see BitLocker Group Policy settings. The following list provides examples of specific events that will cause BitLocker to enter recovery mode when attempting to start the operating system drive:. On PCs that use BitLocker Drive Encryption, or on devices such as tablets or phones that use BitLocker Device Encryption only, when an attack is detected, the device will immediately reboot and enter into BitLocker recovery mode.

Or they can use the MaxFailedPasswordAttempts policy of Exchange ActiveSync also configurable through Microsoft Intune , to limit the number of failed password attempts before the device goes into Device Lockout. On devices with TPM 1. However, devices with TPM 2. TPM 2. Docking or undocking a portable computer.

In some instances depending on the computer manufacturer and the BIOS , the docking condition of the portable computer is part of the system measurement and must be consistent to validate the system status and unlock BitLocker. So if a portable computer is connected to its docking station when BitLocker is turned on, then it might also need to be connected to the docking station when it’s unlocked.

Conversely, if a portable computer isn’t connected to its docking station when BitLocker is turned on, then it might need to be disconnected from the docking station when it’s unlocked. Changes to the NTFS partition table on the disk including creating, deleting, or resizing a primary partition. Entering the personal identification number PIN incorrectly too many times so that the anti-hammering logic of the TPM is activated.

Anti-hammering logic is software or hardware methods that increase the difficulty and cost of a brute force attack on a PIN by not accepting PIN entries until after a certain amount of time has passed. Adding or removing hardware; for example, inserting a new card in the computer, including some PCMIA wireless cards.

Removing, inserting, or completely depleting the charge on a smart battery on a portable computer. Hiding the TPM from the operating system. When implemented, this option can make the TPM hidden from the operating system. Using a different keyboard that doesn’t correctly enter the PIN or whose keyboard map doesn’t match the keyboard map assumed by the pre-boot environment.

This problem can prevent the entry of enhanced PINs. Losing the USB flash drive containing the startup key when startup key authentication has been enabled. For example, a non-compliant implementation may record volatile data such as time in the TPM measurements, causing different measurements on each startup and causing BitLocker to start in recovery mode.

The BitLocker TPM initialization process sets the usage authorization value to zero, so another user or process must explicitly have changed this value. Adding or removing add-in cards such as video or network cards , or upgrading firmware on add-in cards. Using a BIOS hot key during the boot process to change the boot order to something other than the hard drive. Before beginning recovery, it is recommend to determine what caused recovery.

This might help prevent the problem from occurring again in the future. For instance, if it is determined that an attacker has modified the computer by obtaining physical access, new security policies can be created for tracking who has physical presence. After the recovery password has been used to recover access to the PC, BitLocker reseals the encryption key to the current values of the measured components.

For planned scenarios, such as a known hardware or firmware upgrades, initiating recovery can be avoided by temporarily suspending BitLocker protection. Because suspending BitLocker leaves the drive fully encrypted, the administrator can quickly resume BitLocker protection after the planned task has been completed.

Using suspend and resume also reseals the encryption key without requiring the entry of the recovery key. If suspended BitLocker will automatically resume protection when the PC is rebooted, unless a reboot count is specified using the manage-bde command line tool. If software maintenance requires the computer to be restarted and two-factor authentication is being used, the BitLocker network unlock feature can be enabled to provide the secondary authentication factor when the computers don’t have an on-premises user to provide the additional authentication method.

Recovery has been described within the context of unplanned or undesired behavior. However, recovery can also be caused as an intended production scenario, for example in order to manage access control. When desktop or laptop computers are redeployed to other departments or employees in the enterprise, BitLocker can be forced into recovery before the computer is given to a new user.

Before a thorough BitLocker recovery process is created, it’s recommended to test how the recovery process works for both end users people who call the helpdesk for the recovery password and administrators people who help the end user get the recovery password. The -forcerecovery command of manage-bde. Right select on cmd.

Recovery triggered by -forcerecovery persists for multiple restarts until a TPM protector is added or protection is suspended by the user. When using Modern Standby devices such as Surface devices , the -forcerecovery option is not recommended because BitLocker will have to be unlocked and disabled manually from the WinRE environment before the OS can boot up again.

For more information, see BitLocker Troubleshooting: Continuous reboot loop with BitLocker recovery on a slate device. Microsoft Enterprise. Browse All Community Hubs. Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Show only Search instead for. Did you mean:.

Sign In. Dilip Radhakrishnan. Published Aug 11 AM Here is a quick summary of those announcements and the current status although I do recommend you read both posts in detail : We have added many configuration service providers, or CSPs, to Microsoft Intune to help you turn on, manage, report the status of, and turn off BitLocker encryption, including Trusted Platform Module TPM management.

In Intune, these CSPs were added in the second half of We added these capabilities to Configuration Manager starting with a private preview in June , and they are generally available today. In November of , we combined our two enterprise management offerings—Microsoft Intune for cloud management and Configuration Manager for on-premises management—into a single offering called Microsoft Endpoint Manager.

Today over million devices are managed with Microsoft Endpoint Manager. Create an Endpoint Security profile in Microsoft Endpoint Manager As you enable settings, additional settings may appear. Configuring BitLocker settings in Microsoft Endpoint Manager Finally, add Scope tags, assign the new policy to specific groups of users or devices, and select Create. Manage BitLocker using Configuration Manager For enterprise organizations currently using on-premises management of their endpoint devices, the best approach would be to enable co-management with Microsoft Intune and Configuration Manager, and use the CSPs available in Microsoft Intune.

Creating a new BitLocker Management Control Policy to manage BitLocker on the Configuration Manager managed devices As you select these checkboxes, additional pages will appear in the navigation pane on the left. Specifying setup information for the BitLocker Management Control Policy All entries listed in the screenshot above are the default once enabled and are not necessarily the recommended settings.

Configuring BitLocker Management Control Policy settings for OS drives Configuring the settings on the Fixed Drive page allows you to enable fixed drive encryption, as well as specify whether or not fixed drives can be auto-unlocked, deny write access to fixed drives that are not protected by BitLocker, and specify whether or not to install BitLocker To Go on FAT formatted drives.

Configuring BitLocker Management Control Policy settings for fixed drives The next page allows you to specify the settings which will be applied to removeable drives, such as denying access to those drives which have not been protected with BitLocker, and whether or not these removeable drives should be accessible from earlier versions of Windows.

Configuring BitLocker Management Control Policy settings for removable system drives Finally, the Client Management policy allows you to manage the key recovery service backup of the BitLocker information, such as Recovery password and key package, or Recovery password only. Configuring client management settings for the BitLocker Management Control Policy Once the policy has been created, deploy it to the target Collection.